Home : Products : RiskSafe : International Standards
International Standards

RiskSafe adheres to the following international standards:
International Electrotechnical Commission (IEC)
International Organization for Standardization (ISO).
European Norm (EN)
They are grouped:
Type A Standards. Basic safety standards
Type B Standards. Group safety standards
Type C Standards. Individual safety standards
International
Note: The following table is representative of extent standards. It is not a comprehensive list. If you have a standard that you need to meet that is not listed here, contact Dyadem for more information.

Sorted by Standard Number

Standard NumberTitle
Type A Standards
Standards related to basic concepts and design concepts that can be applied to all machinery.
ISO 12100-1&2Safety of machinery: basic concepts, general principles for design
ISO 14121Safety of machinery - principles of risk assessment
IEC-61508 (parts 1, 2, 3, 4, 5)Functional safety of electrical/electronic/ programmable electronic safety related systems
EN 1050Principle of risk assessment
EN 292-1Basic concept, general principles for design
Part 1: Basic terminology, methodology
EN 292-2Basic concept, general principles for design
Part 2: Technical principles and specifications
Type B standards
Standards related to safety and safety equipment that can be applied to different types of machinery.
EN 418Emergency stop equipment, functional aspects - principles for design
EN 574Two-hand control devices, functional aspects - principle for design
EN 954-1Safety-related parts of control systems part 1: General principles for design
EN 999The positioning of protective equipment in respect of approach speeds of parts of the human body.
EN 1088Interlocking devices associated with guards - principles for design and selection
EN 1127-1Explosive atmospheres - explosion prevention and protection part 1: Basic concepts and methodology
EN 1760-1General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
EN 60204-1Electrical equipment of machines part 1: Specification for general requirements
EN 60947-1Low-voltage switch gear and control gear part 1: General rules
EN 61469-1Electro-sensitive protective equipment part 1: General requirements and tests
prEN 61496-2Electro-sensitive protective equipment part 2: Particular requirements for equipment using active opto-electronic devices
IEC 60947 5; 5-1; 5-2; 5-3Low voltage switch gear and control gear; electromechanical control circuit devices; proximity devices; proximity devices with defined behavior under fault conditions
ISO 13851Two hand control devices
ISO 13852Safety distances to prevent danger zones from being reached by upper limbs
ISO 13853Safety distances to prevent danger zones from being reached by lower limbs
ISO 13854Minimum gaps to avoid crushing of parts of the human body
ISO 13855Hand/arm speed - approach speeds of the human body for positioning protective equipment
ISO 13856 (4 parts)Pressure sensitive protective devices
ISO 14120General requirements for the design and construction of guards
ISO 14118Prevention of unexpected start up
ISO 14119Interlocking devices with and without guard locking
ISO 4413Safety requirements for fluid power systems and components - hydraulics
ISO 4414Safety requirements for fluid power systems and components - pneumatics
Type C standards
Standards that specify detailed safety requirements for specific machinery.
Cold working of metals (Machines for)
EN 692Mechanical presses
EN 693Hydraulic presses, press-brakes, pneumatic presses
EN 869Safety requirements for high pressure metal die-casting units
Food processing machines
prEN 1672-1Food processing machinery - safety and hygiene requirements - basic concepts part 1: Safety requirements
EN 1974Slicing machines
EN 1978Vegetable cutting machines
Miscellaneous
EN 81-1Safety rules for the construction and installation of electric lifts
EN 81-2Safety rules for the construction and installation of hydraulic lifts
EN 115Safety rules for the construction and installation of escalators and passenger conveyors
EN 775Manipulating industrial robots
EN 1525Industrial trucks - driverless trucks and their systems
EN 10472Industrial laundry machinery
EN 11111Textile machinery
EN 12626Laser processing machines
Packaging machines
EN 415-1Common requirements
EN 415-2Machines for preformed rigid packaging
EN 415-3Form, fill and seal machines
EN 415-4Palletisers and depalletisers
EN 415-5Wrapping machines
EN 415-6Machines to form collective packaging
EN 4111-3Machines to ensure cohesion of load units
Paper-making machines
prEN 1010Technical safety requirements for the design and construction of printing and paper converting machines
prEN 1034Technical safety requirements for the design and construction of paper making and finishing machines
Rubber and plastic machines
EN 201Rubber and plastic machines - injection moulding machines - safety requirements
EN 289Compression and transfer moulding presses
EN 422Blow moulding machines intended for the production of hollow articles
EN 1114Extruders and extrusion lines
EN 1417Two roll mills
EN 1612-1Reaction moulding machines
Tannery machines
EN 930Roughing, scouring, polishing, and trimming machines
EN 931Footwear manufacturing machines. Lasting machines
EN 972Reciprocating roller machines
EN 1035Moving plate machines
EN 1845Footwear moulding machines
Wood working machines
EN 848One-side moulding machines with rotating tool
EN 859Handfed surface planing machines
EN 860One side thickness planing machines
EN 861Surface planing and thicknessing machines
EN 940Combined wood working machines

Sorted by Type, then Title

Standard NumberTitle
Type A Standards
Standards related to basic concepts and design concepts that can be applied to all machinery.
EN 292-1Basic concept, general principles for design part 1: Basic terminology, methodology
EN 292-2Basic concept, general principles for design part 2: Technical principles and specifications
IEC-61508 (parts 1, 2, 3, 4, 5)Functional safety of electrical/electronic/ programmable electronic safety related systems
EN 1050Principle of risk assessment
ISO 14121Safety of machinery - principles of risk assessment
ISO 12100-1&2Safety of machinery: basic concepts, general principles for design
Type B standards
Standards related to safety and safety equipment that can be applied to different types of machinery.
EN 60204-1Electrical equipment of machines part 1: Specification for general requirements
EN 61469-1Electro-sensitive protective equipment part 1: General requirements and tests
prEN 61496-2Electro-sensitive protective equipment part 2: Particular requirements for equipment using active opto-electronic devices
EN 418Emergency stop equipment, functional aspects - principles for design
EN 1127-1Explosive atmospheres - explosion prevention and protection part 1: Basic concepts and methodology
EN 1760-1General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
ISO 14120General requirements for the design and construction of guards
ISO 13855Hand/arm speed - approach speeds of the human body for positioning protective equipment
EN 1088Interlocking devices associated with guards - principles for design and selection
ISO 14119Interlocking devices with and without guard locking
IEC 60947 5; 5-1; 5-2; 5-3Low voltage switch gear and control gear; electromechanical control circuit devices; proximity devices; proximity devices with defined behavior under fault conditions
EN 60947-1Low-voltage switch gear and control gear part 1: General rules
ISO 13854Minimum gaps to avoid crushing of parts of the human body
ISO 13856 (4 parts)Pressure sensitive protective devices
ISO 14118Prevention of unexpected start up
ISO 13853Safety distances to prevent danger zones from being reached by lower limbs
ISO 13852Safety distances to prevent danger zones from being reached by upper limbs
ISO 4413Safety requirements for fluid power systems and components - hydraulics
ISO 4414Safety requirements for fluid power systems and components - pneumatics
EN 954-1Safety-related parts of control systems part 1: General principles for design
EN 999The positioning of protective equipment in respect of approach speeds of parts of the human body.
ISO 13851Two hand control devices
EN 574Two-hand control devices, functional aspects - principle for design
Type C standards
Standards that specify detailed safety requirements for specific machinery.
Cold working of metals (Machines for)
EN 693Hydraulic presses, press-brakes, pneumatic presses
EN 692Mechanical presses
EN 869Safety requirements for high pressure metal die-casting units
Food processing machines
prEN 1672-1Food processing machinery - safety and hygiene requirements - basic concepts part 1: Safety requirements
EN 1974Slicing machines
EN 1978Vegetable cutting machines
Miscellaneous
EN 10472Industrial laundry machinery
EN 1525Industrial trucks - driverless trucks and their systems
EN 12626Laser processing machines
EN 775Manipulating industrial robots
EN 81-1Safety rules for the construction and installation of electric lifts
EN 115Safety rules for the construction and installation of escalators and passenger conveyors
EN 81-2Safety rules for the construction and installation of hydraulic lifts
EN 11111Textile machinery
Packaging machines
EN 415-1Common requirements
EN 415-2Machines for preformed rigid packaging
EN 415-3Form, fill and seal machines
EN 4111-3Machines to ensure cohesion of load units
EN 415-4Palletisers and depalletisers
EN 415-5Wrapping machines
EN 415-6Machines to form collective packaging
Paper-making machines
prEN 1034Technical safety requirements for the design and construction of paper making and finishing machines
prEN 1010Technical safety requirements for the design and construction of printing and paper converting machines
Rubber and plastic machines
EN 422Blow moulding machines intended for the production of hollow articles
EN 289Compression and transfer moulding presses
EN 1114Extruders and extrusion lines
EN 1612-1Reaction moulding machines
EN 201Rubber and plastic machines - injection moulding machines - safety requirements
EN 1417Two roll mills
Tannery machines
EN 931Footwear manufacturing machines. Lasting machines
EN 1845Footwear moulding machines
EN 1035Moving plate machines
EN 972Reciprocating roller machines
EN 930Roughing, scouring, polishing, and trimming machines
Wood working machines
EN 940Combined wood working machines
EN 859Handfed surface planing machines
EN 860One side thickness planing machines
EN 848One-side moulding machines with rotating tool
EN 861Surface planing and thicknessing machines