|
|
U.S. Standards
The United States uses two sets of standards to which RiskSafe adheres:
- Occupational Safety and Health Administration (OSHA)
- American National Standards Institute (ANSI)
|
OSHA
Note: The following table is representative of extent standards. It is not a comprehensive list. If you have a standard that you need to meet that is not listed here, contact Dyadem for more information.
Sorted by Standard Number
|
| Standard Number | Title |
|---|
| 1910 Subpart P | Hand and portable powered tools and other hand-held equipment |
| 1910 Subpart Q | Welding, cutting, and brazing |
| 1910 Subpart R | Special industries |
| 1910.211 | Definition |
| 1910.212 | General requirements for all machines |
| 1910.213 | Woodworking machinery requirements |
| 1910.214 | Cooperage machinery |
| 1910.215 | Abrasive wheel machinery |
| 1910.216 | Mills and calenders in the rubber and plastic industries |
| 1910.217 | Mechanical power presses |
| 1910.218 | Forging machines |
| 1910.219 | Mechanical power-transmission apparatus |
| 1910.241 | Definitions |
| 1910.242 | Hand and portable powered tools and equipment, general |
| 1910.243 | Guarding of portable powered tools |
| 1910.244 | Other portable tools and equipment |
| 1910.251 | Definitions |
| 1910.252 | General requirements |
| 1910.253 | Oxygen-fuel gas welding and cutting |
| 1910.254 | Arc welding and cutting |
| 1910.255 | Resistance welding |
| 1910.261 | Pulp, paper, and paperboard mills |
| 1910.262 | Textiles |
| 1910.263 | Bakery equipment |
| 1910.264 | Laundry machinery and operations |
| 1910.265 | Sawmills |
| 1910.266 | Logging operations |
|
Sorted by Title
|
| Standard Number | Title |
|---|
| 1910.215 | Abrasive wheel machinery |
| 1910.254 | Arc welding and cutting |
| 1910.263 | Bakery equipment |
| 1910.214 | Cooperage machinery |
| 1910.211 | Definition |
| 1910.241 | Definitions |
| 1910.251 | Definitions |
| 1910.218 | Forging machines |
| 1910.252 | General requirements |
| 1910.212 | General requirements for all machines |
| 1910.243 | Guarding of portable powered tools |
| 1910.242 | Hand and portable powered tools and equipment, general |
| 1910 Subpart P | Hand and portable powered tools and other hand-held equipment |
| 1910.264 | Laundry machinery and operations |
| 1910.266 | Logging operations |
| 1910.217 | Mechanical power presses |
| 1910.219 | Mechanical power-transmission apparatus |
| 1910.216 | Mills and calenders in the rubber and plastic industries |
| 1910.244 | Other portable tools and equipment |
| 1910.253 | Oxygen-fuel gas welding and cutting |
| 1910.261 | Pulp, paper, and paperboard mills |
| 1910.255 | Resistance welding |
| 1910.265 | Sawmills |
| 1910 Subpart R | Special industries |
| 1910.262 | Textiles |
| 1910 Subpart Q | Welding, cutting, and brazing |
| 1910.213 | Woodworking machinery requirements |
|
ANSI
Note: The following table is representative of extent standards. It is not a comprehensive list. If you have a standard that you need to meet that is not listed here, contact Dyadem for more information.
Sorted by Standard Number
|
| Standard Number | Title |
|---|
| ANSI/01.1-1992 | Woodworking machinery-safety requirements |
| ANSI/ALI ALCTV-1998 | Automotive lifts-safety requirements for construction, testing and validation |
| ANSI/ALI ALOIM-2000 | Automotive lifts-safety requirements for operation, inspection and maintenance |
| ANSI/B11.1-1988 (R94) | Mechanical power presses (under review) |
| ANSI/B11.10-1990 (R98) | Sawing machines (under review) |
| ANSI/B11.11-1985 (R94) | Gear cutting machines |
| ANSI/B11.12-1996 | Roll forming & roll bending (under review) |
| ANSI/B11.13-1992 (R98) | Automatic screw/bar and chucking machines |
| ANSI/B11.14-1996 | Coil Slitting machines |
| ANSI/B11.15-1984 (R94) | Pipe, tube, and shape bending machines (under review) |
| ANSI/B11.16-1988 | Metal powder compacting |
| ANSI/B11.17-1996 | Horizontal hydraulic extrusion presses (under review) |
| ANSI/B11.18-1997 | Coil processing systems |
| ANSI/B11.19-1990 (R97) | Safeguarding methods |
| ANSI/B11.2-1995 | Hydraulic power presses |
| ANSI/B11.20-1991 | Manufacturing systems/cells |
| ANSI/B11.21-1997 | Machines using lasers |
| ANSI/B11.3-1982 (R94) | Power press brakes (OSHA-CPL 2-1.25) |
| ANSI/B11.4-1993 | Shears |
| ANSI/B11.5-1988 (R94) | Iron workers |
| ANSI/B11.6-1984 (R94) | Lathes |
| ANSI/B11.7-1995 (R00) | Cold headers & cold formers |
| ANSI/B11.8-1983 (R94) | Drilling, milling, and boring |
| ANSI/B11.9-1975 (R97) | Grinding machines |
| ANSI/B65.1-1995 | Printing press systems |
| ANSI/B65.2-1999 | Binding and finishing systems |
| ANSI/B65.5-1996 | Stand alone platen presses |
| ANSI/SPI B151.1 - 1998 | Horizontal injection moulding machines |
| ANSI/SPI B151.27 - 1998 | Robots used with horizontal injection moulding machines |
| ANSI/Z244.1-1982 | Lockout/tagout of energy sources (under review) |
| ANSI/Z245.1-1999 | Mobile wastes and recyclable materials collection, transportation, and compacting equipment safety requirements (Note: See additional requirements issued by MOL) |
| ANSI/Z245.2-1997 | Refuse collection, processing, and disposal equipment - stationary compactors - safety requirements |
| ANSI/Z245.5-1990 | Baling equipment |
| ANSI/Z268.1-1982 | Metal scrap processing equipment |
| RIA/ANSI/15.06 - 1999 | Industrial robots and robot systems |
|
Sorted by Title
|
| Standard Number | Title |
|---|
| ANSI/B11.13-1992 (R98) | Automatic screw/bar and chucking machines |
| ANSI/ALI ALCTV-1998 | Automotive lifts-safety requirements for construction, testing and validation |
| ANSI/ALI ALOIM-2000 | Automotive lifts-safety requirements for operation, inspection and maintenance |
| ANSI/Z245.5-1990 | Baling equipment |
| ANSI/B65.2-1999 | Binding and finishing systems |
| ANSI/B11.18-1997 | Coil processing systems |
| ANSI/B11.14-1996 | Coil Slitting machines |
| ANSI/B11.7-1995 (R00) | Cold headers & cold formers |
| ANSI/B11.8-1983 (R94) | Drilling, milling, and boring |
| ANSI/B11.11-1985 (R94) | Gear cutting machines |
| ANSI/B11.9-1975 (R97) | Grinding machines |
| ANSI/B11.17-1996 | Horizontal hydraulic extrusion presses (under review) |
| ANSI/SPI B151.1 - 1998 | Horizontal injection moulding machines |
| ANSI/B11.2-1995 | Hydraulic power presses |
| RIA/ANSI/15.06 - 1999 | Industrial robots and robot systems |
| ANSI/B11.5-1988 (R94) | Iron workers |
| ANSI/B11.6-1984 (R94) | Lathes |
| ANSI/Z244.1-1982 | Lockout/tagout of energy sources (under review) |
| ANSI/B11.21-1997 | Machines using lasers |
| ANSI/B11.20-1991 | Manufacturing systems/cells |
| ANSI/B11.1-1988 (R94) | Mechanical power presses (under review) |
| ANSI/B11.16-1988 | Metal powder compacting |
| ANSI/Z268.1-1982 | Metal scrap processing equipment |
| ANSI/Z245.1-1999 | Mobile wastes and recyclable materials collection, transportation, and compacting equipment safety requirements (Note: See additional requirements issued by MOL) |
| ANSI/B11.15-1984 (R94) | Pipe, tube, and shape bending machines (under review) |
| ANSI/B11.3-1982 (R94) | Power press brakes (OSHA-CPL 2-1.25) |
| ANSI/B65.1-1995 | Printing press systems |
| ANSI/Z245.2-1997 | Refuse collection, processing, and disposal equipment - stationary compactors - safety requirements |
| ANSI/SPI B151.27 - 1998 | Robots used with horizontal injection moulding machines |
| ANSI/B11.12-1996 | Roll forming & roll bending (under review) |
| ANSI/B11.19-1990 (R97) | Safeguarding methods |
| ANSI/B11.10-1990 (R98) | Sawing machines (under review) |
| ANSI/B11.4-1993 | Shears |
| ANSI/B65.5-1996 | Stand alone platen presses |
| ANSI/01.1-1992 | Woodworking machinery-safety requirements |
|
|
|
|
|
